OkyAnuS
10-09-2007, 20:08
Kod:
tar -zxf Unreal3.2.2.tar.gz
yaparak açıyoruz.
Sırayla aşağıdaki adımları takip ediyoruz.
Kod:
1) cd Unreal3.2
Kod:
2) ./Config
Çıkan sorulara vereceğiniz cevaplar.
a)
Kod:
[Enter to continue]
enter'a basarak %100'e gelinceye kadar devam ediyoruz.
b)
Kod:
Do you want to enable the server anti-spoof protection? [No]
enter diyerek geçiyoruz.
c)
Kod:
What directory are all the server configuration files in?[/home2/scud34/Unreal3.2] ->
enter diyerek geçiyoruz.
c)
Kod:
Would you like to compile as a hub or as a leaf?Type Hub to select hub and Leaf to select leaf.[Hub] ->
enter diyerek geçiyoruz.
d)
Kod:
What is the hostname of the server running your IRCd?[shell.xxxx.com] ->
enter diyerek geçiyoruz.
e)
Kod:
What should the default permissions for your configuration files be? (Set this to 0 to disable)It is strongly recommended that you use 0600 to prevent unwanted reading of the file[0600] ->
enter diyerek geçiyoruz.
f)
Kod:
Do you want to support SSL (Secure Sockets Layer) connections?[No] ->
SSL desteği vermiyecekseniz ; enter yaparak geçin ; Bu özelliğin normal olarak no kalması tavsiye edilir.
g)
Kod:
Do you want to enable IPv6 support?[No] ->
TurkTelekom'un desteklemediği bir olay ; enter diyerek geçiyoruz. ( no olarak kalıyor )
h)
Kod:
Do you want to enable ziplinks support?[No] ->
enter diyerek geçiyoruz.
ı)
Kod:
Do you want to enable remote includes?[No] ->
enter diyerek geçiyoruz.
i)
Kod:
Do you want to enable prefixes for chanadmin and chanowner?This will give +a the & prefix and ~ for +q (just like +o is @)Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient, PJIRC, etc.)with the notable exceptions of irssi, KVIrc and CGI:IRC.This feature should be enabled/disabled network-wide.[No] ->
Prefix'lerin açılıp açılmayacağını soruyor ; yani aop , sop , founder (@) olarak kalsın istiyorsanız 'enter' yapıp geçiniz. Eğer Aop (@) Sop (&) , Founder (~) olsun istiyorsanız; Yes yazıp 'enter' a basıyoruz.
j)
Kod:
What listen() backlog value do you wish to use? Some older servershave problems with more than 5, others work fine with many more.[5] ->
enter diyerek geçiyoruz.
k)
Kod:
How far back do you want to keep the nickname history?[2000] ->
enter diyerek geçiyoruz.
l)
Kod:
What is the maximum sendq length you wish to have?[3000000] ->
enter diyerek geçiyoruz.
m)
Kod:
How many buffer pools would you like?This number will be multiplied by MAXSENDQLENGTH.[18] ->
enter diyerek geçiyoruz.
n)
Kod:
How many file descriptors (or sockets) can the IRCd use?[1024] ->
enter diyerek geçiyoruz.
o)
Kod:
Would you like any more parameters to configure?Write them here:[]->
son olarak 'enter' a basıyoruz ve kurulum başlıyor ; bu yazı çıkana kadar kurulum'un bitmesini bekliyoruz.
Kod:
| || UnrealIRCd Compile-Time Config ||________________________________________________ _______________________||_________________________ ______________________________________________|| || Now all you have to do is type 'make' and let it compile. When that's || done, you will receive other instructions on what to do next. || ||________________________________________________ _______________________||_________________________ ______________________________________________|| - The UnrealIRCd Team - || || * Stskeeps stskeeps@unrealircd.com (stskeeps@unrealircd.com) || * codemastr codemastr@unrealircd.com (codemastr@unrealircd.com) || * Syzop syzop@unrealircd.com (syzop@unrealircd.com) ||________________________________________________ _______________________|[scud34@shell Unreal3.2]$
tar -zxf Unreal3.2.2.tar.gz
yaparak açıyoruz.
Sırayla aşağıdaki adımları takip ediyoruz.
Kod:
1) cd Unreal3.2
Kod:
2) ./Config
Çıkan sorulara vereceğiniz cevaplar.
a)
Kod:
[Enter to continue]
enter'a basarak %100'e gelinceye kadar devam ediyoruz.
b)
Kod:
Do you want to enable the server anti-spoof protection? [No]
enter diyerek geçiyoruz.
c)
Kod:
What directory are all the server configuration files in?[/home2/scud34/Unreal3.2] ->
enter diyerek geçiyoruz.
c)
Kod:
Would you like to compile as a hub or as a leaf?Type Hub to select hub and Leaf to select leaf.[Hub] ->
enter diyerek geçiyoruz.
d)
Kod:
What is the hostname of the server running your IRCd?[shell.xxxx.com] ->
enter diyerek geçiyoruz.
e)
Kod:
What should the default permissions for your configuration files be? (Set this to 0 to disable)It is strongly recommended that you use 0600 to prevent unwanted reading of the file[0600] ->
enter diyerek geçiyoruz.
f)
Kod:
Do you want to support SSL (Secure Sockets Layer) connections?[No] ->
SSL desteği vermiyecekseniz ; enter yaparak geçin ; Bu özelliğin normal olarak no kalması tavsiye edilir.
g)
Kod:
Do you want to enable IPv6 support?[No] ->
TurkTelekom'un desteklemediği bir olay ; enter diyerek geçiyoruz. ( no olarak kalıyor )
h)
Kod:
Do you want to enable ziplinks support?[No] ->
enter diyerek geçiyoruz.
ı)
Kod:
Do you want to enable remote includes?[No] ->
enter diyerek geçiyoruz.
i)
Kod:
Do you want to enable prefixes for chanadmin and chanowner?This will give +a the & prefix and ~ for +q (just like +o is @)Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient, PJIRC, etc.)with the notable exceptions of irssi, KVIrc and CGI:IRC.This feature should be enabled/disabled network-wide.[No] ->
Prefix'lerin açılıp açılmayacağını soruyor ; yani aop , sop , founder (@) olarak kalsın istiyorsanız 'enter' yapıp geçiniz. Eğer Aop (@) Sop (&) , Founder (~) olsun istiyorsanız; Yes yazıp 'enter' a basıyoruz.
j)
Kod:
What listen() backlog value do you wish to use? Some older servershave problems with more than 5, others work fine with many more.[5] ->
enter diyerek geçiyoruz.
k)
Kod:
How far back do you want to keep the nickname history?[2000] ->
enter diyerek geçiyoruz.
l)
Kod:
What is the maximum sendq length you wish to have?[3000000] ->
enter diyerek geçiyoruz.
m)
Kod:
How many buffer pools would you like?This number will be multiplied by MAXSENDQLENGTH.[18] ->
enter diyerek geçiyoruz.
n)
Kod:
How many file descriptors (or sockets) can the IRCd use?[1024] ->
enter diyerek geçiyoruz.
o)
Kod:
Would you like any more parameters to configure?Write them here:[]->
son olarak 'enter' a basıyoruz ve kurulum başlıyor ; bu yazı çıkana kadar kurulum'un bitmesini bekliyoruz.
Kod:
| || UnrealIRCd Compile-Time Config ||________________________________________________ _______________________||_________________________ ______________________________________________|| || Now all you have to do is type 'make' and let it compile. When that's || done, you will receive other instructions on what to do next. || ||________________________________________________ _______________________||_________________________ ______________________________________________|| - The UnrealIRCd Team - || || * Stskeeps stskeeps@unrealircd.com (stskeeps@unrealircd.com) || * codemastr codemastr@unrealircd.com (codemastr@unrealircd.com) || * Syzop syzop@unrealircd.com (syzop@unrealircd.com) ||________________________________________________ _______________________|[scud34@shell Unreal3.2]$